November 27, 2009

Swords & Knifes XI - Persian Dagger


This horse headed dagger is probably from Persia. I'm not really sure. There are very similar daggers also on the Philippines. There was also a cape at the scabbard, but was lost somehow at a house moving.
The grip is of wood and the scabbard is also of wood with a leather cover.
Blade length: 24 cm (9.5")
Overall length: 36 cm (14.2")


I'm thankful for every more informations about this dagger. As usual write me an e-mail at: info@ravens-nest.ch

November 25, 2009

New at Facebook

After a hot discussion at a German music blog, I've decided to carry out a test.
The blogger, and I think music coach, claimed that Facebook is a way better networking place to get fans as MySpace. This guy gives tips for musicians, but I totally disagree in this case.
I think MySpace is the best place for musicians. I met so many great people at MySpace. And how to become fans at Facebook if you're an unknown or barely known artist?
I like the MySpace layout. I can make my own layout. I don't like the Facebook layout. I can present my music and me at MySpace way better as at Facebook.
After I commented the blog some guy replayed me immediately, and a hot discussion was not to avoidance.
So I decided to make my Facebook fanpage. I do not believe to get any real fans at this page. Of course friends will join this page and maybe some friend's friends. But real fans?
Let's see what happens, but I don't think to get at least 100 freinds together.
Have a look and join if you like. xD

Raven's Facebook Fanpage


Enhanced by Zemanta

November 17, 2009

Swords & Knifes X - Fantasy dagger



This flame-bladed dagger is actually a letter knife.
I get this one from a friend because of my unicorn with wings tattoo.
There's a unicorn head as a bommel with a brass grip. A wing is used as the cross-guard.




Overall lenght: 27 cm (10.6")
Blade lenght: 17 cm (6.6")


I have no idea what this dagger stands for. It looks a bit like Frodo's string sword from Lord of the Rings. So may we call it an elbish dagger.
The grip and the scabbard is very cheap made, but well manufactured.


Overall length: 25 cm (10")
Blade lenght: 15 cm (6")

November 15, 2009

Swords & Knifes IX - Viktor's sword




This is the accurate Underworld replica movie sword.
Viktor's sword is also one of my favourite swords.
Viktor, played by Bill Nighy, is one of the Vampire elders who kills his own beloved daughter Sonja, who's in love with a Lycan (werewolf) slave. Viktor will be killed by his stepdaughter Selene a few centuries later with his own sword.
This one in not the licensed movie sword but it's a specific reproduction.
The 37" sword with a 26" stainless steel blade comes with a leather wrapped handle and Viktor's crest. It includes a free custom built wooden display plaque.
The sword is well balanced.



Underworld: Rise of the Lycans
Reblog this post [with Zemanta]

Swords & Knifes VIII - Hussars sabre



This is an original hussars sabre from the 18th century or even older. It was used in battles and is no replica. The grip is rebuild because it was lost at excavations. The hussars cavalry was created in Hungary in the 15th century. During the 18th and 19th centuries hussars were raised by most European army's.

The blade lenght is 70 cm (27.5") and the handle is 14 cm (5.5"). So the overall lenght is 84 cm (33"). The grip is made of wood and probably was original of wood and was rotten in the ground.
This sabre valued something around 5000 $




Reblog this post [with Zemanta]

Swords & Knifes VII - Claymore



This piece is of course one of my favourite swords. I call it tenderly my toothpick. (Because it's so "small".)
The gaelic name for this sword is claidheamh mòr, what means big sword. As I said a toothpick! :-)
It is a two-handed Scottish Highlander sword. The Claymore is still used by the Highland regiments of the British Army. It was used in the clan warfare and border fights with the English.
This sword I own is certainly a replica, but the original sword was used by Highland clans of the late 15th and 16th centuries. It's replicared from a surviving museum piece.
It was original carried slung on the back.
This Claymore is of high carbon spring steel, with a leather covered grip.




Blade length: 120 cm (47")
Handle length: ca. 33 cm (13")
Overall length: 153 cm (60")
Weight: ca. 5lb
Value: around 125 $
Reblog this post [with Zemanta]

Swords & Knifes VI - Roman decorator sword



The helmed soldier represents the pride of ancient Rome.
Blade lenght: 84 cm
Overall lenght: 104 cm
A cheap made in Italy sword. I get it with the Templar sword for a good price.

Swords & Knifes V - Templar Sword



There are upteen Templar swords. I have not much informations about this one, yet.
The cross detailed sword symbolised the faith during their crusades. This replica of the thrusting sword is probably made in Italy.
Blade lenght: 89 cm
Overall lenght: 116 cm
Reblog this post [with Zemanta]

November 14, 2009

Swords & Knifes IV - Kukri


The Kukri or Khukuri is a Nepalese and Indian knife. This one is a mini jungle Kukri from Nepal.
Blade lenght: 16.5 cm (6.5")
Overall lenght: 23.5 cm (9.25")
The design is centuries old and the blade lenght is actually 12"/15". The Kukri traditionally hold two small knifes called karda and chakmak.



The karda is for skinning and the chakmak for sharpening the blade and starting fires.
The notch at the base's called cho or kaudi.
The scabbard is of wood and a leather covering, and a chape at the end.
The grip is also of wood with a pommel cap at the end.

Reblog this post [with Zemanta]

Swords & Knifes III - Swiss bayonet


This is a Swiss engineer bayonet M1914; from the armory Elsener Schwyz with the number 642086. This one has a sawback and it's a very rare piece. It fits to the 1896 and 1911 repeating rifle.
Todays price of this bayonet is around 450/500 US$.
Size of the blade is 50cm (20"), and the grip with cross-guard is 14cm (5.5").
Most M1914 bayonets I found in the Internet have damages at the blade. This one is in best condition.
The grip is of steel and wood, the scabbard is of metal, and the bracket is of leather.
Year of construction is early 20th century.

November 13, 2009

Swords & Knifes II - Tizona, Sword of El Cid



This was my first sword. I found this piece in scrap metal when I was 9 years old. My parents were not happy about my new achievement. I loved swords already as a tiny little girl. My first "sword" was carved of wood from my dad when I was around 6 or 7 years old.
The name of this sword is Tizona and it's El Cid's sword. Rodrigo Díaz de Vivar known as El Cid Campeador, who was a Castilian nobleman and was fighting the Moors in Spain. The original sword is 103 cm long and 1.1 kg. My sword is 77 cm (30"). The blade is 62 cm and the grip with pommel is 15 cm long.
The Tizona is Spains most cherished relict and it's exhibited at the Museo de Burgos. The original sword is dated 1002.

In Burgos (Spain), the statue of "the Cid...Image via Wikipedia




Reblog this post [with Zemanta]

Swords & Knifes I - sawfish sword

This piece is around 150 years old. It is a very rare piece and not easy to find. There is a smaller one, very similar to that one in the historic museum in Bern, Switzerland. This sword's origins are  probably from Indonesia (or Malaysia).
The blade descendes from a sawfish. The crossguard and the grip are of metal. The size of the blade is 58 cm (22.83") and the grip is 16 cm (6.3").
Indonesian people also used a very smaller sawfish sword for rituals.
The sawfish is today under protection of species!

By the way, they've also used a sawfish sword in Pirates of the Carribbean - Dead Man's Chest in 2006

I have no idea how much such an old sawfish swords costs and I have not more informations about this sword. I'm thankful for every information. (info@ravens-nest.ch) I'll also visit the Historic Museum in Bern in a week or two to found out more about that sword.




Reblog this post [with Zemanta]

November 10, 2009

New songs up!

I've finished some of my songs and uploaded them on ReverbNation, MySpace and Last.fm.
One's called "Tunes Of War", please read also my blog entry at MySpace; and the other songs called "The Pain In Me".
Actually I just wanted to upload four songs at MySpace, but I had so many positive feedbacks for "The Pain In Me", I had to upload it on MySpace, too.
I've deleted all the songs at MySpace and uploaded the two new songs and re-uploaded "Soundtrack Of Your Life" in a better quality.
I'm still waiting for my collaboration songs.
What else? I'm pretty into fractal art since a few weeks and I'll make a clip to one of my songs later this year.
So check out my new tunes!
Cheers